Victor 16" x 40" Engine Lathe with DRO

Front.JPG
Spindle.JPG
Collet Closer.JPG
DRO.JPG
Aloris tool post.JPG
Front.JPG
Spindle.JPG
Collet Closer.JPG
DRO.JPG
Aloris tool post.JPG

Victor 16" x 40" Engine Lathe with DRO

0.00

Swing over bed                      16”

Swing over cross slide           10-1/4”

Swing in gap, length of gap   22-3/4”, 9-4/5”

Distance between centers      40”

Width of bed                            11”

Spindle nose                             D1-6 camlock

Spindle bore                              2”

Taper of spindle bore                MT-6

Taper of center in sleeve           MT-4

Spindle speeds (2 Speed)    120 - 1800 RPM

Leadscrew pitch, diameter   4 TPI, 1” Inch threads (32)

                                               4 - 56 TPI

Metric threads                       0.5 - 7.0 mm

Longitudinal feeds             0.0026 - 0.0455 inch/rev

Cross feeds                        0.0033 - 0.0366 inch/rev

Tailstock taper                     MT-4

Travel of tailstock quill        4”

Motor                                   7-1/2HP, 220V, 3PH, 60CY

Approximate dimensions    84” x 37” x 52” high

Approximate weight            2,530 lbs.

EQUIPPED WITH:

Acu-Rite Digital Read Out

Aloris Tool Post

Thread Dial

Turret Micro Carriage Stop

Multiple Longitudinal Stop

5C Collet Closer

F.O.B. Springfield, MA

Add To Cart